Vacuum concentration is to heat the material under vacuum (or decompression) condition, so that the solvent is jubilant at low temperature and separated from the active ingredients in gaseous state. When the gaseous solvent flows through the condensing tank, it is liquefied and recovered. However, if the material temperature is too low or the vacuum is too low, the concentration time will be too long, the power of the concentrator will decrease, and the concentration will be affected. If the material temperature is too high or the vacuum is too large, it will lead to many steam and foam entering the condensing tank, and even enter the vacuum equipment through the vacuum pipeline, which will cause pollution and damage to the vacuum equipment, and the heat used for heating the heating tank is not easy to recover. Use, waste power. And most of the existing vacuum concentration pots are large, inconvenient to move, and the effect of concentration is not good, so we need a new coil vacuum concentration pot to deal with the above problems, to meet people's needs.

 

Concentrator

 

A coil vacuum concentration pot comprises a concentration pot main body, the outer surface of the concentration pot main body is provided with a concentration pot shell, the left side of the top end of the concentration pot main body is provided with a feeding device, the outer surface of the concentration pot main body is provided with a vacuum pumping device, the left middle part of the concentration pot main body is provided with an observation window, the inner part of the concentration pot main body is provided with a coil, and the top end of the coil is provided with a plate The outer surface of the coil is provided with a coil heater, the bottom end of the coil is provided with a coil outlet, the left and right sides of the inner wall of the concentration pot body are symmetrically provided with side heating sheets, the left and right sides of the bottom end of the concentration pot body are symmetrically provided with a concentration pot fixed column, and the bottom end of the concentration pot fixed column is provided with a roller device.

 

Preferably, the feeding equipment comprises a feeding pipe and a feeding controller, the feeding pipe is arranged on the outer surface of the feeding equipment, and the feeding controller is arranged in the middle of the feeding pipe.